[Gluster-devel] AFR between two bricks over 3000 miles

[Krishna Srinivas]

Nathan,

Check the performance by bringing writebehind into the picture your
config file shows that WB and iocache translators are not being used.

Regards
Krishna

On Sat, Mar 1, 2008 at 8:48 AM,  <nathan at robotics.net> wrote:
>
>  /etc/sysconfig is only 748K
>  cp /etc/sysconfig to /share/mirror took real    0m55.319s
>  cp /etc/sysconfig to /share took real    0m0.030s
>
>  I expected it to be much faster. :)
>
>  # Client
>  volume nyc
>    type protocol/client
>    option transport-type tcp/client
>    option remote-host 10.11.0.1
>    option remote-subvolume nyc
>  end-volume
>
>  volume sjc
>    type protocol/client
>    option transport-type tcp/client
>    option remote-host 10.12.0.1
>    option remote-subvolume sjc
>  end-volume
>
>  volume sjc_iocache
>    type performance/io-cache
>    option page-size 256KB
>    option page-count 2
>    subvolumes sjc
>  end-volume
>
>  volume sjc_write-behind
>    type performance/write-behind
>    option aggregate-size 1MB
>    option flush-behind on
>    subvolumes sjc_iocache
>  end-volume
>
>  volume mirror
>    type cluster/afr
>    subvolumes nyc sjc
>  end-volume
>
>
>
>  ><>
>  Nathan Stratton
>  nathan at robotics.net
>  http://www.robotics.net
>
>
>
>  On Thu, 28 Feb 2008, Anand Avati wrote:
>
>  > on the client. you also might want to put this write-behind + io-cache pair
>  > in the subvolume path of afr which leads towards the remote site alone. Also
>  > make sure afr does not have the remote site as the first subvolume, and has
>  > the option read-subvolume <local-volume> so that reads are not scheduled to
>  > the remote site.
>  >
>  > avati
>  >
>  > 2008/2/28, nathan at robotics.net <nathan at robotics.net>:
>  >>
>  >>
>  >> On Thu, 28 Feb 2008, Anand Avati wrote:
>  >>
>  >>> using a combination of write-behind with io-threads (with option
>  >>> flush-behind on) prevents the wait of upto N-MB of data (where N is
>  >> 'option
>  >>> cache-size NMB' of io-threads)
>  >>
>  >>
>  >> Client and server are on each host, should I do this on the client or
>  >> server?
>  >>
>  >> -Nathan
>  >>
>  >
>  >
>  >
>  > --
>  > If I traveled to the end of the rainbow
>  > As Dame Fortune did intend,
>  > Murphy would be there to tell me
>  > The pot's at the other end.
>  >
>
>
>  _______________________________________________
>  Gluster-devel mailing list
>  Gluster-devel at nongnu.org
>  http://lists.nongnu.org/mailman/listinfo/gluster-devel
>