[Gluster-devel] about glusterfs--mainline--3.0--patch-717

[nicolas prochazka]

No,
When i run glusterfs with --debug option, nothing appear.
I just see that glusferfsd process consume a lot of cpu, and that's on big
file, ( 10G ) acces by a lot of client simultanous, glusterfs/glusterfsd ?
seems to be not respond, data not send like a deadlock or loop.

Regards,
Nicolas Prochazka

2008/12/9 Anand Avati <avati at zresearch.com>

> Nicolas,
> Do you have logs from the client and server?
>
> avati
>
> 2008/12/9 nicolas prochazka <prochazka.nicolas at gmail.com>:
> > hi again,
> > about glusterfs--mainline--3.0--patch-727 with same configuration.
> > Now glusterfsd seems to be take a lot of cpu ressource > 20 %  , and ls
> -l
> > /glustermount/  is very very long to respond ( > 5 minutes ).
> > We can notice that with -719  the issue is not appearing.
> >
> > Nicolas Prochazka.
> >
> > 2008/12/8 nicolas prochazka <prochazka.nicolas at gmail.com>
> >>
> >> Thanks it's working now.
> >> Regards,
> >> Nicolas Prochazka
> >>
> >> 2008/12/8 Basavanagowda Kanur <gowda at zresearch.com>
> >>>
> >>> Nicolas,
> >>>   Please use glusterfs--mainline--3.0--patch-719.
> >>>
> >>> --
> >>> gowda
> >>>
> >>> On Mon, Dec 8, 2008 at 3:07 PM, nicolas prochazka
> >>> <prochazka.nicolas at gmail.com> wrote:
> >>>>
> >>>> Hi,
> >>>> It seems that  glusterfs--mainline--3.0--patch-717  has a new problem,
> >>>> which not appear at least witch  glusterfs--mainline--3.0--patch-710
> >>>> Now i've :
> >>>> ls: cannot open directory /mnt/vdisk/: Software caused connection
> abort
> >>>>
> >>>> Regards,
> >>>> Nicolas Prochazka.
> >>>>
> >>>> my client spec file  :
> >>>> volume brick1
> >>>> type protocol/client
> >>>> option transport-type tcp/client # for TCP/IP transport
> >>>> option remote-host 10.98.98.1   # IP address of server1
> >>>> option remote-subvolume brick    # name of the remote volume on
> server1
> >>>> end-volume
> >>>>
> >>>> volume brick2
> >>>> type protocol/client
> >>>> option transport-type tcp/client # for TCP/IP transport
> >>>> option remote-host 10.98.98.2   # IP address of server2
> >>>> option remote-subvolume brick    # name of the remote volume on
> server2
> >>>> end-volume
> >>>>
> >>>> volume afr
> >>>> type cluster/afr
> >>>> subvolumes brick1 brick2
> >>>> end-volume
> >>>>
> >>>> volume iothreads
> >>>> type performance/io-threads
> >>>> option thread-count 4
> >>>> option cache-size 32MB
> >>>> subvolumes afr
> >>>> end-volume
> >>>>
> >>>> volume io-cache
> >>>> type performance/io-cache
> >>>> option cache-size 256MB             # default is 32MB
> >>>> option page-size  1MB              #128KB is default option
> >>>> option force-revalidate-timeout 2  # default is 1
> >>>> subvolumes iothreads
> >>>> end-volume
> >>>>
> >>>> my server spec-file
> >>>> volume brickless
> >>>> type storage/posix
> >>>> option directory /mnt/disks/export
> >>>> end-volume
> >>>>
> >>>> volume brick
> >>>> type features/posix-locks
> >>>> option mandatory on          # enables mandatory locking on all files
> >>>> subvolumes brickless
> >>>> end-volume
> >>>>
> >>>> volume server
> >>>> type protocol/server
> >>>> subvolumes brick
> >>>> option transport-type tcp
> >>>> option auth.addr.brick.allow 10.98.98.*
> >>>> end-volume
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Gluster-devel mailing list
> >>>> Gluster-devel at nongnu.org
> >>>> http://lists.nongnu.org/mailman/listinfo/gluster-devel
> >>>>
> >>>
> >>>
> >>>
> >>> --
> >>> hard work often pays off after time, but laziness always pays off now
> >>
> >
> >
> > _______________________________________________
> > Gluster-devel mailing list
> > Gluster-devel at nongnu.org
> > http://lists.nongnu.org/mailman/listinfo/gluster-devel
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-devel/attachments/20081210/b9acfbcb/attachment-0003.html>