[Gluster-devel] AFR Replication

[Krishna Srinivas]

Can you give the howto link? It needs to be corrected.
Multiple line options is not supported yet, as of now it has to
be saperated by comma.

Krishna

On Fri, Apr 18, 2008 at 6:14 PM, Christopher Hawkins
<chawkins at veracitynetworks.com> wrote:
> That worked for me. According to the howto you can specify multiple auth
>  lines, but it looks like only one auth line per volume is correct?
>
>
>  Thanks,
>  Chris
>
>  -----Original Message-----
>  From: gluster-devel-bounces+chawkins=veracitynetworks.com at nongnu.org
>  [mailto:gluster-devel-bounces+chawkins=veracitynetworks.com at nongnu.org] On
>
> Behalf Of Krishna Srinivas
>  Sent: Friday, April 18, 2008 8:26 AM
>  To: gordan at bobich.net
>  Cc: Gluster Devel
>  Subject: Re: [Gluster-devel] AFR Replication
>
>
>
> Gordon,
>
>  Specify the following option in server spec file:
>  option auth.ip.foo.allow 192.168.*,127.0.0.1
>
>  Krishna
>
>  On Fri, Apr 18, 2008 at 5:00 PM,  <gordan at bobich.net> wrote:
>  > On Fri, 18 Apr 2008, Krishna Srinivas wrote:
>  >
>  >
>  > > If you still get errors, check for error messages when you start the
>  > > client.
>  > >
>  >
>  >  OK, upgraded to 1.3.8pre5 RPMs. Started both servers, then both clients.
>  > Now the logs say:
>  >
>  >  glusterfs.log:
>  >  2008-04-18 12:22:18 C [afr.c:6185:afr_check_xattr_cbk] foo: [CRITICAL]:
>  > 'foo1' doesn't support Extended attribute
>  >  2008-04-18 12:22:18 E
>  > [client-protocol.c:5089:client_protocol_handshake_reply] foo2:
>  > SETVOLUME on remote-host failed: ret=-1 error=Authentication failed
>  >  2008-04-18 12:22:18 W [client-protocol.c:279:client_protocol_xfer] foo2:
>  > attempting to pipeline request type(1) op(19) with handshake
>  >  2008-04-18 12:22:18 W
>  > [client-protocol.c:4759:client_protocol_cleanup]
>  > foo2: cleaning up state in transport object 0x60ee60
>  >  2008-04-18 12:22:18 E
>  > [client-protocol.c:4809:client_protocol_cleanup]
>  > foo2: forced unwinding frame type(1) op(19) reply=@0x612330
>  >  2008-04-18 12:22:18 E [client-protocol.c:4025:client_setxattr_cbk]
>  > foo2: no proper reply from server, returning ENOTCONN
>  >  2008-04-18 12:22:18 C [afr.c:6185:afr_check_xattr_cbk] appleseed:
>  > [CRITICAL]: 'foo2' doesn't support Extended attribute
>  >  2008-04-18 12:22:18 C [tcp.c:87:tcp_disconnect] foo2: connection
>  > disconnected
>  >
>  >  glusterfsd.log:
>  >  2008-04-18 12:22:14 E [authenticate.c:173:gf_authenticate] auth:
>  > Nobody cares to authenticate!! Rejecting the client foo
>  >  2008-04-18 12:22:14 E [server-protocol.c:5633:mop_setvolume] server:
>  > Cannot authenticate client from 192.168.0.1:1021
>  >  2008-04-18 12:22:14 E
>  > [server-protocol.c:6002:server_protocol_interpret]
>  > server: bound_xl is null
>  >  2008-04-18 12:22:14 C [tcp.c:87:tcp_disconnect] server: connection
>  > disconnected
>  >  2008-04-18 12:22:15 E [protocol.c:271:gf_block_unserialize_transport]
>  > server: EOF from peer (192.168.0.1:1020)
>  >  2008-04-18 12:22:15 C [tcp.c:87:tcp_disconnect] server: connection
>  > disconnected
>  >  2008-04-18 12:22:18 W [posix.c:1511:posix_setxattr] foo: setxattr on /:
>  > Operation not supported
>  >
>  >  Does this shed more light on what is going wrong?
>  >
>  >
>  >
>  >  Gordan
>  >
>  >
>  >  _______________________________________________
>  >  Gluster-devel mailing list
>  >  Gluster-devel at nongnu.org
>  >  http://lists.nongnu.org/mailman/listinfo/gluster-devel
>  >
>
>
>  _______________________________________________
>  Gluster-devel mailing list
>  Gluster-devel at nongnu.org
>  http://lists.nongnu.org/mailman/listinfo/gluster-devel
>
>
>
>  _______________________________________________
>  Gluster-devel mailing list
>  Gluster-devel at nongnu.org
>  http://lists.nongnu.org/mailman/listinfo/gluster-devel
>