[Gluster-devel] auth.brick.ip.allow restrictions

[Majied Najjar]

Hi,

You can create a list of IP addresses which is comment delimited.  For example:

option auth.ip.brick.allow 192.168.28.6,192.168.28.7

Hope that helps.

Majied


On Mon, 30 Apr 2007 17:38:07 +0200
Sebastien LELIEVRE <slelievre at tbs-internet.com> wrote:

> Hello everyone
> 
> I'm posting this here because I need an advice from you.
> 
> On all examples presented on the web-site, and the user-config posted
> here, you always allow a wide range of IP address (something like option
> auth.ip.brick.allow 192.168.28.* )
> 
> My question is : how to I configure the servers in order to accept just
> a list of IP addresses ?
> 
> I've tried this config :
> 
> volume server
>   type protocol/server
>   option transport-type tcp/server
> interfaces
>   subvolumes brick
>   option auth.ip.brick.allow 192.168.28.6
>   option auth.ip.brick.allow 192.168.28.7
> end-volume
> 
> and client 192.168.28.6 wasn't able to connect.
> Error message on this client side is : Transport endpoint is not connected
> 
> and on the server side, the log give us this :
> 
> [Apr 30 17:16:57] [DEBUG/tcp-server.c:134/tcp_server_notify()]
> tcp/server:Registering socket (5) for new transport object of 192.168.28.6
> [Apr 30 17:17:08] [DEBUG/proto-srv.c:2418/mop_setvolume()]
> server-protocol:mop_setvolume: received port = 1022
> [Apr 30 17:17:08] [DEBUG/proto-srv.c:2434/mop_setvolume()]
> server-protocol:mop_setvolume: IP addr = 192.168.28.7, received ip addr
> = 192.168.28.6
> [Apr 30 17:17:08] [ERROR/common-utils.c:55/full_rw()]
> libglusterfs:full_rw: 0 bytes r/w instead of 113 (errno=17)
> [Apr 30 17:17:08]
> [DEBUG/protocol.c:244/gf_block_unserialize_transport()]
> libglusterfs/protocol:gf_block_unserialize_transport: full_read of
> header failed
> [Apr 30 17:17:08] [DEBUG/proto-srv.c:2868/proto_srv_cleanup()]
> protocol/server:cleaned up xl_private of 0x8050998
> [Apr 30 17:17:08] [CRITICAL/tcp.c:82/tcp_disconnect()]
> transport/tcp:closing socket: 5 priv->connected = 1
> [Apr 30 17:17:08] [DEBUG/tcp-server.c:229/gf_transport_fini()]
> tcp/server:destroying transport object for 192.168.28.6:1022 (fd=5)
> [Apr 30 17:17:19] [DEBUG/tcp-server.c:134/tcp_server_notify()]
> tcp/server:Registering socket (5) for new transport object of 192.168.28.6
> [Apr 30 17:17:28] [DEBUG/proto-srv.c:2418/mop_setvolume()]
> server-protocol:mop_setvolume: received port = 1021
> [Apr 30 17:17:28] [DEBUG/proto-srv.c:2434/mop_setvolume()]
> server-protocol:mop_setvolume: IP addr = 192.168.28.7, received ip addr
> = 192.168.28.6
> [Apr 30 17:17:28] [ERROR/common-utils.c:55/full_rw()]
> libglusterfs:full_rw: 0 bytes r/w instead of 113 (errno=9)
> [Apr 30 17:17:28]
> [DEBUG/protocol.c:244/gf_block_unserialize_transport()]
> libglusterfs/protocol:gf_block_unserialize_transport: full_read of
> header failed
> [Apr 30 17:17:28] [DEBUG/proto-srv.c:2868/proto_srv_cleanup()]
> protocol/server:cleaned up xl_private of 0x804b1e8
> [Apr 30 17:17:28] [CRITICAL/tcp.c:82/tcp_disconnect()]
> transport/tcp:closing socket: 5 priv->connected = 1
> [Apr 30 17:17:28] [DEBUG/tcp-server.c:229/gf_transport_fini()]
> tcp/server:destroying transport object for 192.168.28.6:1021 (fd=5)
> 
> On the other hand, client 192.168.28.7 is successfully connected.
> 
> Both server and client versions are 1.3.0-pre3 from the latest tla.
> 
> Regards,
> 
> Enkahel
> 
> Sebastien LELIEVRE
> slelievre at tbs-internet.com           Services to ISP
> TBS-internet                   http://www.TBS-internet.com:
> 
> 
> _______________________________________________
> Gluster-devel mailing list
> Gluster-devel at nongnu.org
> http://lists.nongnu.org/mailman/listinfo/gluster-devel