[Gluster-users] RDMA Problems with GlusterFS 3.1.1

Artem Trunov datamove at gmail.com
Mon Dec 13 12:54:00 UTC 2010


Hi, Jeremy, Raghavendra

Thanks! That patch worked just fine for me as well.

cheers,
artem

On Mon, Dec 13, 2010 at 2:39 AM, Jeremy Stout <stout.jeremy at gmail.com> wrote:
> I recompiled GlusterFS using the unaccepted patch and I haven't
> received any RDMA error messages yet. I'll run some benchmarking tests
> over the next couple of days to test the program's stability.
>
> Thank you.
>
> On Fri, Dec 10, 2010 at 12:22 AM, Raghavendra G <raghavendra at gluster.com> wrote:
>> Hi Artem,
>>
>> you can check the maximum limits using the patch I had sent earlier in the same thread. Also, the patch
>> http://patches.gluster.com/patch/5844/ (which is not accepted yet), will check for whether the number of cqe being passed in ibv_creation_cq is greater than the value allowed by the device and if so, it will try to create CQ with maximum limit allowed by the device.
>>
>> regards,
>> ----- Original Message -----
>> From: "Artem Trunov" <datamove at gmail.com>
>> To: "Raghavendra G" <raghavendra at gluster.com>
>> Cc: "Jeremy Stout" <stout.jeremy at gmail.com>, gluster-users at gluster.org
>> Sent: Thursday, December 9, 2010 7:13:40 PM
>> Subject: Re: [Gluster-users] RDMA Problems with GlusterFS 3.1.1
>>
>> Hi, Ravendra, Jeremy
>>
>> This was very interesting debugging thread to me, since I have the
>> same symptoms, but unsure of the origin. Please see log for my mount
>> command at the end of the message.
>>
>> I have installed 3.3.1. My OFED is 1.5.1 - does it make serious
>> difference between already mentioned 1.5.2?
>>
>> On hardware limitations - I have Mellanox InfiniHost III Lx 20Gb/s and
>> it says in specs:
>>
>> "Supports 16 million QPs, EEs & CQs "
>>
>> Is this enough? How can I query for actual settings on max_cq, max_cqe?
>>
>> In general, how should I proceed? What are my other debugging options?
>> Should I try to go Jeremy path with hacking the gluster code?
>>
>> cheers
>> Artem.
>>
>> Log:
>>
>> ---------
>> [2010-12-09 15:15:53.847595] W [io-stats.c:1644:init] test-volume:
>> dangling volume. check volfile
>> [2010-12-09 15:15:53.847643] W [dict.c:1204:data_to_str] dict: @data=(nil)
>> [2010-12-09 15:15:53.847657] W [dict.c:1204:data_to_str] dict: @data=(nil)
>> [2010-12-09 15:15:53.858574] E [rdma.c:2066:rdma_create_cq]
>> rpc-transport/rdma: test-volume-client-1: creation of send_cq failed
>> [2010-12-09 15:15:53.858805] E [rdma.c:3771:rdma_get_device]
>> rpc-transport/rdma: test-volume-client-1: could not create CQ
>> [2010-12-09 15:15:53.858821] E [rdma.c:3957:rdma_init]
>> rpc-transport/rdma: could not create rdma device for mthca0
>> [2010-12-09 15:15:53.858893] E [rdma.c:4789:init]
>> test-volume-client-1: Failed to initialize IB Device
>> [2010-12-09 15:15:53.858909] E
>> [rpc-transport.c:971:rpc_transport_load] rpc-transport: 'rdma'
>> initialization failed
>> pending frames:
>>
>> patchset: v3.1.1
>> signal received: 11
>> time of crash: 2010-12-09 15:15:53
>> configuration details:
>> argp 1
>> backtrace 1
>> dlfcn 1
>> fdatasync 1
>> libpthread 1
>> llistxattr 1
>> setfsid 1
>> spinlock 1
>> epoll.h 1
>> xattr.h 1
>> st_atim.tv_nsec 1
>> package-string: glusterfs 3.1.1
>> /lib64/libc.so.6[0x32aca302d0]
>> /lib64/libc.so.6(strcmp+0x0)[0x32aca79140]
>> /usr/lib64/glusterfs/3.1.1/rpc-transport/rdma.so[0x2aaaac4fef6c]
>> /usr/lib64/glusterfs/3.1.1/rpc-transport/rdma.so(init+0x2f)[0x2aaaac50013f]
>> /usr/lib64/libgfrpc.so.0(rpc_transport_load+0x389)[0x3fcca0cac9]
>> /usr/lib64/libgfrpc.so.0(rpc_clnt_new+0xfe)[0x3fcca1053e]
>> /usr/lib64/glusterfs/3.1.1/xlator/protocol/client.so(client_init_rpc+0xa1)[0x2aaaab194f01]
>> /usr/lib64/glusterfs/3.1.1/xlator/protocol/client.so(init+0x129)[0x2aaaab1950d9]
>> /usr/lib64/libglusterfs.so.0(xlator_init+0x58)[0x3fcc617398]
>> /usr/lib64/libglusterfs.so.0(glusterfs_graph_init+0x31)[0x3fcc640291]
>> /usr/lib64/libglusterfs.so.0(glusterfs_graph_activate+0x38)[0x3fcc6403c8]
>> /usr/sbin/glusterfs(glusterfs_process_volfp+0xfa)[0x40373a]
>> /usr/sbin/glusterfs(mgmt_getspec_cbk+0xc5)[0x406125]
>> /usr/lib64/libgfrpc.so.0(rpc_clnt_handle_reply+0xa2)[0x3fcca0f542]
>> /usr/lib64/libgfrpc.so.0(rpc_clnt_notify+0x8d)[0x3fcca0f73d]
>> /usr/lib64/libgfrpc.so.0(rpc_transport_notify+0x2c)[0x3fcca0a95c]
>> /usr/lib64/glusterfs/3.1.1/rpc-transport/socket.so(socket_event_poll_in+0x3f)[0x2aaaaad6ef9f]
>> /usr/lib64/glusterfs/3.1.1/rpc-transport/socket.so(socket_event_handler+0x170)[0x2aaaaad6f130]
>> /usr/lib64/libglusterfs.so.0[0x3fcc637917]
>> /usr/sbin/glusterfs(main+0x39b)[0x40470b]
>> /lib64/libc.so.6(__libc_start_main+0xf4)[0x32aca1d994]
>> /usr/sbin/glusterfs[0x402e29]
>>
>>
>>
>>
>> On Fri, Dec 3, 2010 at 1:53 PM, Raghavendra G <raghavendra at gluster.com> wrote:
>>> From the logs its evident that the reason for completion queue creation failure is that the number of completion queue elements (in a completion queue) we had requested in ibv_create_cq, (1024 * send_count) is less than the maximum supported by the ib hardware (max_cqe = 131071).
>>>
>>> ----- Original Message -----
>>> From: "Jeremy Stout" <stout.jeremy at gmail.com>
>>> To: "Raghavendra G" <raghavendra at gluster.com>
>>> Cc: gluster-users at gluster.org
>>> Sent: Friday, December 3, 2010 4:20:04 PM
>>> Subject: Re: [Gluster-users] RDMA Problems with GlusterFS 3.1.1
>>>
>>> I patched the source code and rebuilt GlusterFS. Here are the full logs:
>>> Server:
>>> [2010-12-03 07:08:55.945804] I [glusterd.c:275:init] management: Using
>>> /etc/glusterd as working directory
>>> [2010-12-03 07:08:55.947692] E [rdma.c:2047:rdma_create_cq]
>>> rpc-transport/rdma: max_mr_size = 18446744073709551615, max_cq =
>>> 65408, max_cqe = 131071, max_mr = 131056
>>> [2010-12-03 07:08:55.953226] E [rdma.c:2079:rdma_create_cq]
>>> rpc-transport/rdma: rdma.management: creation of send_cq failed
>>> [2010-12-03 07:08:55.953509] E [rdma.c:3785:rdma_get_device]
>>> rpc-transport/rdma: rdma.management: could not create CQ
>>> [2010-12-03 07:08:55.953582] E [rdma.c:3971:rdma_init]
>>> rpc-transport/rdma: could not create rdma device for mthca0
>>> [2010-12-03 07:08:55.953668] E [rdma.c:4803:init] rdma.management:
>>> Failed to initialize IB Device
>>> [2010-12-03 07:08:55.953691] E
>>> [rpc-transport.c:971:rpc_transport_load] rpc-transport: 'rdma'
>>> initialization failed
>>> [2010-12-03 07:08:55.953780] I [glusterd.c:96:glusterd_uuid_init]
>>> glusterd: generated UUID: 4eb47ca7-227c-49c4-97bd-25ac177b2f6a
>>> Given volfile:
>>> +------------------------------------------------------------------------------+
>>>  1: volume management
>>>  2:     type mgmt/glusterd
>>>  3:     option working-directory /etc/glusterd
>>>  4:     option transport-type socket,rdma
>>>  5:     option transport.socket.keepalive-time 10
>>>  6:     option transport.socket.keepalive-interval 2
>>>  7: end-volume
>>>  8:
>>>
>>> +------------------------------------------------------------------------------+
>>> [2010-12-03 07:09:10.244790] I
>>> [glusterd-handler.c:785:glusterd_handle_create_volume] glusterd:
>>> Received create volume req
>>> [2010-12-03 07:09:10.247646] I [glusterd-utils.c:232:glusterd_lock]
>>> glusterd: Cluster lock held by 4eb47ca7-227c-49c4-97bd-25ac177b2f6a
>>> [2010-12-03 07:09:10.247678] I
>>> [glusterd-handler.c:2835:glusterd_op_txn_begin] glusterd: Acquired
>>> local lock
>>> [2010-12-03 07:09:10.247708] I
>>> [glusterd3_1-mops.c:1091:glusterd3_1_cluster_lock] glusterd: Sent lock
>>> req to 0 peers
>>> [2010-12-03 07:09:10.248038] I
>>> [glusterd3_1-mops.c:1233:glusterd3_1_stage_op] glusterd: Sent op req
>>> to 0 peers
>>> [2010-12-03 07:09:10.251970] I
>>> [glusterd3_1-mops.c:1323:glusterd3_1_commit_op] glusterd: Sent op req
>>> to 0 peers
>>> [2010-12-03 07:09:10.252020] I
>>> [glusterd3_1-mops.c:1145:glusterd3_1_cluster_unlock] glusterd: Sent
>>> unlock req to 0 peers
>>> [2010-12-03 07:09:10.252036] I
>>> [glusterd-op-sm.c:4738:glusterd_op_txn_complete] glusterd: Cleared
>>> local lock
>>> [2010-12-03 07:09:22.11649] I
>>> [glusterd-handler.c:936:glusterd_handle_cli_start_volume] glusterd:
>>> Received start vol reqfor volume testdir
>>> [2010-12-03 07:09:22.11724] I [glusterd-utils.c:232:glusterd_lock]
>>> glusterd: Cluster lock held by 4eb47ca7-227c-49c4-97bd-25ac177b2f6a
>>> [2010-12-03 07:09:22.11734] I
>>> [glusterd-handler.c:2835:glusterd_op_txn_begin] glusterd: Acquired
>>> local lock
>>> [2010-12-03 07:09:22.11761] I
>>> [glusterd3_1-mops.c:1091:glusterd3_1_cluster_lock] glusterd: Sent lock
>>> req to 0 peers
>>> [2010-12-03 07:09:22.12120] I
>>> [glusterd3_1-mops.c:1233:glusterd3_1_stage_op] glusterd: Sent op req
>>> to 0 peers
>>> [2010-12-03 07:09:22.184403] I
>>> [glusterd-utils.c:971:glusterd_volume_start_glusterfs] : About to
>>> start glusterfs for brick pgh-submit-1:/mnt/gluster
>>> [2010-12-03 07:09:22.229143] I
>>> [glusterd3_1-mops.c:1323:glusterd3_1_commit_op] glusterd: Sent op req
>>> to 0 peers
>>> [2010-12-03 07:09:22.229198] I
>>> [glusterd3_1-mops.c:1145:glusterd3_1_cluster_unlock] glusterd: Sent
>>> unlock req to 0 peers
>>> [2010-12-03 07:09:22.229218] I
>>> [glusterd-op-sm.c:4738:glusterd_op_txn_complete] glusterd: Cleared
>>> local lock
>>> [2010-12-03 07:09:22.240157] I
>>> [glusterd-pmap.c:281:pmap_registry_remove] pmap: removing brick (null)
>>> on port 24009
>>>
>>>
>>> Client:
>>> [2010-12-03 07:09:00.82784] W [io-stats.c:1644:init] testdir: dangling
>>> volume. check volfile
>>> [2010-12-03 07:09:00.82824] W [dict.c:1204:data_to_str] dict: @data=(nil)
>>> [2010-12-03 07:09:00.82836] W [dict.c:1204:data_to_str] dict: @data=(nil)
>>> [2010-12-03 07:09:00.85980] E [rdma.c:2047:rdma_create_cq]
>>> rpc-transport/rdma: max_mr_size = 18446744073709551615, max_cq =
>>> 65408, max_cqe = 131071, max_mr = 131056
>>> [2010-12-03 07:09:00.92883] E [rdma.c:2079:rdma_create_cq]
>>> rpc-transport/rdma: testdir-client-0: creation of send_cq failed
>>> [2010-12-03 07:09:00.93156] E [rdma.c:3785:rdma_get_device]
>>> rpc-transport/rdma: testdir-client-0: could not create CQ
>>> [2010-12-03 07:09:00.93224] E [rdma.c:3971:rdma_init]
>>> rpc-transport/rdma: could not create rdma device for mthca0
>>> [2010-12-03 07:09:00.93313] E [rdma.c:4803:init] testdir-client-0:
>>> Failed to initialize IB Device
>>> [2010-12-03 07:09:00.93332] E [rpc-transport.c:971:rpc_transport_load]
>>> rpc-transport: 'rdma' initialization failed
>>> Given volfile:
>>> +------------------------------------------------------------------------------+
>>>  1: volume testdir-client-0
>>>  2:     type protocol/client
>>>  3:     option remote-host submit-1
>>>  4:     option remote-subvolume /mnt/gluster
>>>  5:     option transport-type rdma
>>>  6: end-volume
>>>  7:
>>>  8: volume testdir-write-behind
>>>  9:     type performance/write-behind
>>>  10:     subvolumes testdir-client-0
>>>  11: end-volume
>>>  12:
>>>  13: volume testdir-read-ahead
>>>  14:     type performance/read-ahead
>>>  15:     subvolumes testdir-write-behind
>>>  16: end-volume
>>>  17:
>>>  18: volume testdir-io-cache
>>>  19:     type performance/io-cache
>>>  20:     subvolumes testdir-read-ahead
>>>  21: end-volume
>>>  22:
>>>  23: volume testdir-quick-read
>>>  24:     type performance/quick-read
>>>  25:     subvolumes testdir-io-cache
>>>  26: end-volume
>>>  27:
>>>  28: volume testdir-stat-prefetch
>>>  29:     type performance/stat-prefetch
>>>  30:     subvolumes testdir-quick-read
>>>  31: end-volume
>>>  32:
>>>  33: volume testdir
>>>  34:     type debug/io-stats
>>>  35:     subvolumes testdir-stat-prefetch
>>>  36: end-volume
>>>
>>> +------------------------------------------------------------------------------+
>>>
>>>
>>> On Fri, Dec 3, 2010 at 12:38 AM, Raghavendra G <raghavendra at gluster.com> wrote:
>>>> Hi Jeremy,
>>>>
>>>> Can you apply the attached patch, rebuild and start glusterfs? Please make sure to send us the logs of glusterfs.
>>>>
>>>> regards,
>>>> ----- Original Message -----
>>>> From: "Jeremy Stout" <stout.jeremy at gmail.com>
>>>> To: gluster-users at gluster.org
>>>> Sent: Friday, December 3, 2010 6:38:00 AM
>>>> Subject: Re: [Gluster-users] RDMA Problems with GlusterFS 3.1.1
>>>>
>>>> I'm currently using OFED 1.5.2.
>>>>
>>>> For the sake of testing, I just compiled GlusterFS 3.1.1 from source,
>>>> without any modifications, on two systems that have a 2.6.33.7 kernel
>>>> and OFED 1.5.2 built from source. Here are the results:
>>>>
>>>> Server:
>>>> [2010-12-02 21:17:55.886563] I
>>>> [glusterd-handler.c:936:glusterd_handle_cli_start_volume] glusterd:
>>>> Received start vol reqfor volume testdir
>>>> [2010-12-02 21:17:55.886597] I [glusterd-utils.c:232:glusterd_lock]
>>>> glusterd: Cluster lock held by 7dd23af5-277e-4ea1-a495-2a9d882287ec
>>>> [2010-12-02 21:17:55.886607] I
>>>> [glusterd-handler.c:2835:glusterd_op_txn_begin] glusterd: Acquired
>>>> local lock
>>>> [2010-12-02 21:17:55.886628] I
>>>> [glusterd3_1-mops.c:1091:glusterd3_1_cluster_lock] glusterd: Sent lock
>>>> req to 0 peers
>>>> [2010-12-02 21:17:55.887031] I
>>>> [glusterd3_1-mops.c:1233:glusterd3_1_stage_op] glusterd: Sent op req
>>>> to 0 peers
>>>> [2010-12-02 21:17:56.60427] I
>>>> [glusterd-utils.c:971:glusterd_volume_start_glusterfs] : About to
>>>> start glusterfs for brick submit-1:/mnt/gluster
>>>> [2010-12-02 21:17:56.104896] I
>>>> [glusterd3_1-mops.c:1323:glusterd3_1_commit_op] glusterd: Sent op req
>>>> to 0 peers
>>>> [2010-12-02 21:17:56.104935] I
>>>> [glusterd3_1-mops.c:1145:glusterd3_1_cluster_unlock] glusterd: Sent
>>>> unlock req to 0 peers
>>>> [2010-12-02 21:17:56.104953] I
>>>> [glusterd-op-sm.c:4738:glusterd_op_txn_complete] glusterd: Cleared
>>>> local lock
>>>> [2010-12-02 21:17:56.114764] I
>>>> [glusterd-pmap.c:281:pmap_registry_remove] pmap: removing brick (null)
>>>> on port 24009
>>>>
>>>> Client:
>>>> [2010-12-02 21:17:25.503395] W [io-stats.c:1644:init] testdir:
>>>> dangling volume. check volfile
>>>> [2010-12-02 21:17:25.503434] W [dict.c:1204:data_to_str] dict: @data=(nil)
>>>> [2010-12-02 21:17:25.503447] W [dict.c:1204:data_to_str] dict: @data=(nil)
>>>> [2010-12-02 21:17:25.543409] E [rdma.c:2066:rdma_create_cq]
>>>> rpc-transport/rdma: testdir-client-0: creation of send_cq failed
>>>> [2010-12-02 21:17:25.543660] E [rdma.c:3771:rdma_get_device]
>>>> rpc-transport/rdma: testdir-client-0: could not create CQ
>>>> [2010-12-02 21:17:25.543725] E [rdma.c:3957:rdma_init]
>>>> rpc-transport/rdma: could not create rdma device for mthca0
>>>> [2010-12-02 21:17:25.543812] E [rdma.c:4789:init] testdir-client-0:
>>>> Failed to initialize IB Device
>>>> [2010-12-02 21:17:25.543830] E
>>>> [rpc-transport.c:971:rpc_transport_load] rpc-transport: 'rdma'
>>>> initialization failed
>>>>
>>>> Thank you for the help so far.
>>>>
>>>> On Thu, Dec 2, 2010 at 8:02 PM, Craig Carl <craig at gluster.com> wrote:
>>>>> Jeremy -
>>>>>   What version of OFED are you running? Would you mind install version 1.5.2
>>>>> from source? We have seen this resolve several issues of this type.
>>>>> http://www.openfabrics.org/downloads/OFED/ofed-1.5.2/
>>>>>
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Craig
>>>>>
>>>>> -->
>>>>> Craig Carl
>>>>> Senior Systems Engineer
>>>>> Gluster
>>>>>
>>>>>
>>>>> On 12/02/2010 10:05 AM, Jeremy Stout wrote:
>>>>>>
>>>>>> An another follow-up, I tested several compilations today with
>>>>>> different values for send/receive count. I found the maximum value I
>>>>>> could use for both variables was 127. With a value of 127, GlusterFS
>>>>>> did not produce any errors. However, when I changed the value back to
>>>>>> 128, the RDMA errors appeared again.
>>>>>>
>>>>>> I also tried setting soft/hard "memlock" to unlimited in the
>>>>>> limits.conf file, but still ran into RDMA errors on the client side
>>>>>> when the count variables were set to 128.
>>>>>>
>>>>>> On Thu, Dec 2, 2010 at 9:04 AM, Jeremy Stout<stout.jeremy at gmail.com>
>>>>>>  wrote:
>>>>>>>
>>>>>>> Thank you for the response. I've been testing GlusterFS 3.1.1 on two
>>>>>>> different OpenSUSE 11.3 systems. Since both systems generated the same
>>>>>>> error messages, I'll include the output for both.
>>>>>>>
>>>>>>> System #1:
>>>>>>> fs-1:~ # cat /proc/meminfo
>>>>>>> MemTotal:       16468756 kB
>>>>>>> MemFree:        16126680 kB
>>>>>>> Buffers:           15680 kB
>>>>>>> Cached:           155860 kB
>>>>>>> SwapCached:            0 kB
>>>>>>> Active:            65228 kB
>>>>>>> Inactive:         123100 kB
>>>>>>> Active(anon):      18632 kB
>>>>>>> Inactive(anon):       48 kB
>>>>>>> Active(file):      46596 kB
>>>>>>> Inactive(file):   123052 kB
>>>>>>> Unevictable:        1988 kB
>>>>>>> Mlocked:            1988 kB
>>>>>>> SwapTotal:             0 kB
>>>>>>> SwapFree:              0 kB
>>>>>>> Dirty:             30072 kB
>>>>>>> Writeback:             4 kB
>>>>>>> AnonPages:         18780 kB
>>>>>>> Mapped:            12136 kB
>>>>>>> Shmem:               220 kB
>>>>>>> Slab:              39592 kB
>>>>>>> SReclaimable:      13108 kB
>>>>>>> SUnreclaim:        26484 kB
>>>>>>> KernelStack:        2360 kB
>>>>>>> PageTables:         2036 kB
>>>>>>> NFS_Unstable:          0 kB
>>>>>>> Bounce:                0 kB
>>>>>>> WritebackTmp:          0 kB
>>>>>>> CommitLimit:     8234376 kB
>>>>>>> Committed_AS:     107304 kB
>>>>>>> VmallocTotal:   34359738367 kB
>>>>>>> VmallocUsed:      314316 kB
>>>>>>> VmallocChunk:   34349860776 kB
>>>>>>> HardwareCorrupted:     0 kB
>>>>>>> HugePages_Total:       0
>>>>>>> HugePages_Free:        0
>>>>>>> HugePages_Rsvd:        0
>>>>>>> HugePages_Surp:        0
>>>>>>> Hugepagesize:       2048 kB
>>>>>>> DirectMap4k:        9856 kB
>>>>>>> DirectMap2M:     3135488 kB
>>>>>>> DirectMap1G:    13631488 kB
>>>>>>>
>>>>>>> fs-1:~ # uname -a
>>>>>>> Linux fs-1 2.6.32.25-November2010 #2 SMP PREEMPT Mon Nov 1 15:19:55
>>>>>>> EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
>>>>>>>
>>>>>>> fs-1:~ # ulimit -l
>>>>>>> 64
>>>>>>>
>>>>>>> System #2:
>>>>>>> submit-1:~ # cat /proc/meminfo
>>>>>>> MemTotal:       16470424 kB
>>>>>>> MemFree:        16197292 kB
>>>>>>> Buffers:           11788 kB
>>>>>>> Cached:            85492 kB
>>>>>>> SwapCached:            0 kB
>>>>>>> Active:            39120 kB
>>>>>>> Inactive:          76548 kB
>>>>>>> Active(anon):      18532 kB
>>>>>>> Inactive(anon):       48 kB
>>>>>>> Active(file):      20588 kB
>>>>>>> Inactive(file):    76500 kB
>>>>>>> Unevictable:           0 kB
>>>>>>> Mlocked:               0 kB
>>>>>>> SwapTotal:      67100656 kB
>>>>>>> SwapFree:       67100656 kB
>>>>>>> Dirty:                24 kB
>>>>>>> Writeback:             0 kB
>>>>>>> AnonPages:         18408 kB
>>>>>>> Mapped:            11644 kB
>>>>>>> Shmem:               184 kB
>>>>>>> Slab:              34000 kB
>>>>>>> SReclaimable:       8512 kB
>>>>>>> SUnreclaim:        25488 kB
>>>>>>> KernelStack:        2160 kB
>>>>>>> PageTables:         1952 kB
>>>>>>> NFS_Unstable:          0 kB
>>>>>>> Bounce:                0 kB
>>>>>>> WritebackTmp:          0 kB
>>>>>>> CommitLimit:    75335868 kB
>>>>>>> Committed_AS:     105620 kB
>>>>>>> VmallocTotal:   34359738367 kB
>>>>>>> VmallocUsed:       76416 kB
>>>>>>> VmallocChunk:   34359652640 kB
>>>>>>> HardwareCorrupted:     0 kB
>>>>>>> HugePages_Total:       0
>>>>>>> HugePages_Free:        0
>>>>>>> HugePages_Rsvd:        0
>>>>>>> HugePages_Surp:        0
>>>>>>> Hugepagesize:       2048 kB
>>>>>>> DirectMap4k:        7488 kB
>>>>>>> DirectMap2M:    16769024 kB
>>>>>>>
>>>>>>> submit-1:~ # uname -a
>>>>>>> Linux submit-1 2.6.33.7-November2010 #1 SMP PREEMPT Mon Nov 8 13:49:00
>>>>>>> EST 2010 x86_64 x86_64 x86_64 GNU/Linux
>>>>>>>
>>>>>>> submit-1:~ # ulimit -l
>>>>>>> 64
>>>>>>>
>>>>>>> I retrieved the memory information on each machine after starting the
>>>>>>> glusterd process.
>>>>>>>
>>>>>>> On Thu, Dec 2, 2010 at 3:51 AM, Raghavendra G<raghavendra at gluster.com>
>>>>>>>  wrote:
>>>>>>>>
>>>>>>>> Hi Jeremy,
>>>>>>>>
>>>>>>>> can you also get the output of,
>>>>>>>>
>>>>>>>> #uname -a
>>>>>>>>
>>>>>>>> #ulimit -l
>>>>>>>>
>>>>>>>> regards,
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "Raghavendra G"<raghavendra at gluster.com>
>>>>>>>> To: "Jeremy Stout"<stout.jeremy at gmail.com>
>>>>>>>> Cc: gluster-users at gluster.org
>>>>>>>> Sent: Thursday, December 2, 2010 10:20:04 AM
>>>>>>>> Subject: Re: [Gluster-users] RDMA Problems with GlusterFS 3.1.1
>>>>>>>>
>>>>>>>> Hi Jeremy,
>>>>>>>>
>>>>>>>> In order to diagnoise why completion queue creation is failing (as
>>>>>>>> indicated by logs), we want to know what was the free memory available in
>>>>>>>> your system when glusterfs was started.
>>>>>>>>
>>>>>>>> regards,
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "Raghavendra G"<raghavendra at gluster.com>
>>>>>>>> To: "Jeremy Stout"<stout.jeremy at gmail.com>
>>>>>>>> Cc: gluster-users at gluster.org
>>>>>>>> Sent: Thursday, December 2, 2010 10:11:18 AM
>>>>>>>> Subject: Re: [Gluster-users] RDMA Problems with GlusterFS 3.1.1
>>>>>>>>
>>>>>>>> Hi Jeremy,
>>>>>>>>
>>>>>>>> Yes, there might be some performance decrease. But, it should not affect
>>>>>>>> working of rdma.
>>>>>>>>
>>>>>>>> regards,
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "Jeremy Stout"<stout.jeremy at gmail.com>
>>>>>>>> To: gluster-users at gluster.org
>>>>>>>> Sent: Thursday, December 2, 2010 8:30:20 AM
>>>>>>>> Subject: Re: [Gluster-users] RDMA Problems with GlusterFS 3.1.1
>>>>>>>>
>>>>>>>> As an update to my situation, I think I have GlusterFS 3.1.1 working
>>>>>>>> now. I was able to create and mount RDMA volumes without any errors.
>>>>>>>>
>>>>>>>> To fix the problem, I had to make the following changes on lines 3562
>>>>>>>> and 3563 in rdma.c:
>>>>>>>> options->send_count = 32;
>>>>>>>> options->recv_count = 32;
>>>>>>>>
>>>>>>>> The values were set to 128.
>>>>>>>>
>>>>>>>> I'll run some tests tomorrow to verify that it is working correctly.
>>>>>>>> Assuming it does, what would be the expected side-effect of changing
>>>>>>>> the values from 128 to 32? Will there be a decrease in performance?
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Dec 1, 2010 at 10:07 AM, Jeremy Stout<stout.jeremy at gmail.com>
>>>>>>>>  wrote:
>>>>>>>>>
>>>>>>>>> Here are the results of the test:
>>>>>>>>> submit-1:/usr/local/glusterfs/3.1.1/var/log/glusterfs #
>>>>>>>>> ibv_srq_pingpong
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000406, PSN 0x703b96, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000407, PSN 0x618cc8, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000408, PSN 0xd62272, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000409, PSN 0x5db5d9, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x00040a, PSN 0xc51978, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x00040b, PSN 0x05fd7a, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x00040c, PSN 0xaa4a51, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x00040d, PSN 0xb7a676, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x00040e, PSN 0x56bde2, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x00040f, PSN 0xa662bc, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000410, PSN 0xee27b0, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000411, PSN 0x89c683, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000412, PSN 0xd025b3, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000413, PSN 0xcec8e4, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000414, PSN 0x37e5d2, GID ::
>>>>>>>>>  local address:  LID 0x0002, QPN 0x000415, PSN 0x29562e, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000406, PSN 0x3b644e, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000407, PSN 0x173320, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000408, PSN 0xc105ea, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000409, PSN 0x5e5ff1, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x00040a, PSN 0xff15b0, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x00040b, PSN 0xf0b152, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x00040c, PSN 0x4ced49, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x00040d, PSN 0x01da0e, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x00040e, PSN 0x69459a, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x00040f, PSN 0x197c14, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000410, PSN 0xd50228, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000411, PSN 0xbc9b9b, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000412, PSN 0x0870eb, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000413, PSN 0xfb1fbc, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000414, PSN 0x3eefca, GID ::
>>>>>>>>>  remote address: LID 0x000b, QPN 0x000415, PSN 0xbd64c6, GID ::
>>>>>>>>> 8192000 bytes in 0.01 seconds = 5917.47 Mbit/sec
>>>>>>>>> 1000 iters in 0.01 seconds = 11.07 usec/iter
>>>>>>>>>
>>>>>>>>> fs-1:/usr/local/glusterfs/3.1.1/var/log/glusterfs # ibv_srq_pingpong
>>>>>>>>> submit-1
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000406, PSN 0x3b644e, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000407, PSN 0x173320, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000408, PSN 0xc105ea, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000409, PSN 0x5e5ff1, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x00040a, PSN 0xff15b0, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x00040b, PSN 0xf0b152, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x00040c, PSN 0x4ced49, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x00040d, PSN 0x01da0e, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x00040e, PSN 0x69459a, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x00040f, PSN 0x197c14, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000410, PSN 0xd50228, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000411, PSN 0xbc9b9b, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000412, PSN 0x0870eb, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000413, PSN 0xfb1fbc, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000414, PSN 0x3eefca, GID ::
>>>>>>>>>  local address:  LID 0x000b, QPN 0x000415, PSN 0xbd64c6, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000406, PSN 0x703b96, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000407, PSN 0x618cc8, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000408, PSN 0xd62272, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000409, PSN 0x5db5d9, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x00040a, PSN 0xc51978, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x00040b, PSN 0x05fd7a, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x00040c, PSN 0xaa4a51, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x00040d, PSN 0xb7a676, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x00040e, PSN 0x56bde2, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x00040f, PSN 0xa662bc, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000410, PSN 0xee27b0, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000411, PSN 0x89c683, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000412, PSN 0xd025b3, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000413, PSN 0xcec8e4, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000414, PSN 0x37e5d2, GID ::
>>>>>>>>>  remote address: LID 0x0002, QPN 0x000415, PSN 0x29562e, GID ::
>>>>>>>>> 8192000 bytes in 0.01 seconds = 7423.65 Mbit/sec
>>>>>>>>> 1000 iters in 0.01 seconds = 8.83 usec/iter
>>>>>>>>>
>>>>>>>>> Based on the output, I believe it ran correctly.
>>>>>>>>>
>>>>>>>>> On Wed, Dec 1, 2010 at 9:51 AM, Anand Avati<anand.avati at gmail.com>
>>>>>>>>>  wrote:
>>>>>>>>>>
>>>>>>>>>> Can you verify that ibv_srq_pingpong works from the server where this
>>>>>>>>>> log
>>>>>>>>>> file is from?
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> Avati
>>>>>>>>>>
>>>>>>>>>> On Wed, Dec 1, 2010 at 7:44 PM, Jeremy Stout<stout.jeremy at gmail.com>
>>>>>>>>>>  wrote:
>>>>>>>>>>>
>>>>>>>>>>> Whenever I try to start or mount a GlusterFS 3.1.1 volume that uses
>>>>>>>>>>> RDMA, I'm seeing the following error messages in the log file on the
>>>>>>>>>>> server:
>>>>>>>>>>> [2010-11-30 18:37:53.51270] I [nfs.c:652:init] nfs: NFS service
>>>>>>>>>>> started
>>>>>>>>>>> [2010-11-30 18:37:53.51362] W [dict.c:1204:data_to_str] dict:
>>>>>>>>>>> @data=(nil)
>>>>>>>>>>> [2010-11-30 18:37:53.51375] W [dict.c:1204:data_to_str] dict:
>>>>>>>>>>> @data=(nil)
>>>>>>>>>>> [2010-11-30 18:37:53.59628] E [rdma.c:2066:rdma_create_cq]
>>>>>>>>>>> rpc-transport/rdma: testdir-client-0: creation of send_cq failed
>>>>>>>>>>> [2010-11-30 18:37:53.59851] E [rdma.c:3771:rdma_get_device]
>>>>>>>>>>> rpc-transport/rdma: testdir-client-0: could not create CQ
>>>>>>>>>>> [2010-11-30 18:37:53.59925] E [rdma.c:3957:rdma_init]
>>>>>>>>>>> rpc-transport/rdma: could not create rdma device for mthca0
>>>>>>>>>>> [2010-11-30 18:37:53.60009] E [rdma.c:4789:init] testdir-client-0:
>>>>>>>>>>> Failed to initialize IB Device
>>>>>>>>>>> [2010-11-30 18:37:53.60030] E
>>>>>>>>>>> [rpc-transport.c:971:rpc_transport_load]
>>>>>>>>>>> rpc-transport: 'rdma' initialization failed
>>>>>>>>>>>
>>>>>>>>>>> On the client, I see:
>>>>>>>>>>> [2010-11-30 18:43:49.653469] W [io-stats.c:1644:init] testdir:
>>>>>>>>>>> dangling volume. check volfile
>>>>>>>>>>> [2010-11-30 18:43:49.653573] W [dict.c:1204:data_to_str] dict:
>>>>>>>>>>> @data=(nil)
>>>>>>>>>>> [2010-11-30 18:43:49.653607] W [dict.c:1204:data_to_str] dict:
>>>>>>>>>>> @data=(nil)
>>>>>>>>>>> [2010-11-30 18:43:49.736275] E [rdma.c:2066:rdma_create_cq]
>>>>>>>>>>> rpc-transport/rdma: testdir-client-0: creation of send_cq failed
>>>>>>>>>>> [2010-11-30 18:43:49.736651] E [rdma.c:3771:rdma_get_device]
>>>>>>>>>>> rpc-transport/rdma: testdir-client-0: could not create CQ
>>>>>>>>>>> [2010-11-30 18:43:49.736689] E [rdma.c:3957:rdma_init]
>>>>>>>>>>> rpc-transport/rdma: could not create rdma device for mthca0
>>>>>>>>>>> [2010-11-30 18:43:49.736805] E [rdma.c:4789:init] testdir-client-0:
>>>>>>>>>>> Failed to initialize IB Device
>>>>>>>>>>> [2010-11-30 18:43:49.736841] E
>>>>>>>>>>> [rpc-transport.c:971:rpc_transport_load] rpc-transport: 'rdma'
>>>>>>>>>>> initialization failed
>>>>>>>>>>>
>>>>>>>>>>> This results in an unsuccessful mount.
>>>>>>>>>>>
>>>>>>>>>>> I created the mount using the following commands:
>>>>>>>>>>> /usr/local/glusterfs/3.1.1/sbin/gluster volume create testdir
>>>>>>>>>>> transport rdma submit-1:/exports
>>>>>>>>>>> /usr/local/glusterfs/3.1.1/sbin/gluster volume start testdir
>>>>>>>>>>>
>>>>>>>>>>> To mount the directory, I use:
>>>>>>>>>>> mount -t glusterfs submit-1:/testdir /mnt/glusterfs
>>>>>>>>>>>
>>>>>>>>>>> I don't think it is an Infiniband problem since GlusterFS 3.0.6 and
>>>>>>>>>>> GlusterFS 3.1.0 worked on the same systems. For GlusterFS 3.1.0, the
>>>>>>>>>>> commands listed above produced no error messages.
>>>>>>>>>>>
>>>>>>>>>>> If anyone can provide help with debugging these error messages, it
>>>>>>>>>>> would be appreciated.
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Gluster-users mailing list
>>>>>>>>>>> Gluster-users at gluster.org
>>>>>>>>>>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Gluster-users mailing list
>>>>>>>> Gluster-users at gluster.org
>>>>>>>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>>>>>>> _______________________________________________
>>>>>>>> Gluster-users mailing list
>>>>>>>> Gluster-users at gluster.org
>>>>>>>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>>>>>>> _______________________________________________
>>>>>>>> Gluster-users mailing list
>>>>>>>> Gluster-users at gluster.org
>>>>>>>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>>>>>>>
>>>>>> _______________________________________________
>>>>>> Gluster-users mailing list
>>>>>> Gluster-users at gluster.org
>>>>>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>>>>
>>>>> _______________________________________________
>>>>> Gluster-users mailing list
>>>>> Gluster-users at gluster.org
>>>>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>>>>
>>>> _______________________________________________
>>>> Gluster-users mailing list
>>>> Gluster-users at gluster.org
>>>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>>>
>>> _______________________________________________
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
>>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>>
>>
>



More information about the Gluster-users mailing list