[Gluster-users] Geo-replication completely broken
Felix Kölzow
felix.koelzow at gmx.de
Thu Jun 25 07:57:20 UTC 2020
Hey Rob,
same issue for our third volume. Have a look at the logs just from right
now (below).
Question: You removed the htime files and the old changelogs. Just rm
the files or is there something to pay more attention
before removing the changelog files and the htime file.
Regards,
Felix
[2020-06-25 07:51:53.795430] I [resource(worker
/gluster/vg00/dispersed_fuse1024/brick):1435:connect_remote] SSH: SSH
connection between master and slave established. duration=1.2341
[2020-06-25 07:51:53.795639] I [resource(worker
/gluster/vg00/dispersed_fuse1024/brick):1105:connect] GLUSTER: Mounting
gluster volume locally...
[2020-06-25 07:51:54.520601] I [monitor(monitor):280:monitor] Monitor:
worker died in startup phase brick=/gluster/vg01/dispersed_fuse1024/brick
[2020-06-25 07:51:54.535809] I
[gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker
Status Change status=Faulty
[2020-06-25 07:51:54.882143] I [resource(worker
/gluster/vg00/dispersed_fuse1024/brick):1128:connect] GLUSTER: Mounted
gluster volume duration=1.0864
[2020-06-25 07:51:54.882388] I [subcmds(worker
/gluster/vg00/dispersed_fuse1024/brick):84:subcmd_worker] <top>: Worker
spawn successful. Acknowledging back to monitor
[2020-06-25 07:51:56.911412] E [repce(agent
/gluster/vg00/dispersed_fuse1024/brick):121:worker] <top>: call failed:
Traceback (most recent call last):
File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 117,
in worker
res = getattr(self.obj, rmeth)(*in_data[2:])
File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py",
line 40, in register
return Changes.cl_register(cl_brick, cl_dir, cl_log, cl_level, retries)
File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py",
line 46, in cl_register
cls.raise_changelog_err()
File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py",
line 30, in raise_changelog_err
raise ChangelogException(errn, os.strerror(errn))
ChangelogException: [Errno 2] No such file or directory
[2020-06-25 07:51:56.912056] E [repce(worker
/gluster/vg00/dispersed_fuse1024/brick):213:__call__] RepceClient: call
failed call=75086:140098349655872:1593071514.91 method=register
error=ChangelogException
[2020-06-25 07:51:56.912396] E [resource(worker
/gluster/vg00/dispersed_fuse1024/brick):1286:service_loop] GLUSTER:
Changelog register failed error=[Errno 2] No such file or directory
[2020-06-25 07:51:56.928031] I [repce(agent
/gluster/vg00/dispersed_fuse1024/brick):96:service_loop] RepceServer:
terminating on reaching EOF.
[2020-06-25 07:51:57.886126] I [monitor(monitor):280:monitor] Monitor:
worker died in startup phase brick=/gluster/vg00/dispersed_fuse1024/brick
[2020-06-25 07:51:57.895920] I
[gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker
Status Change status=Faulty
[2020-06-25 07:51:58.607405] I [gsyncdstatus(worker
/gluster/vg00/dispersed_fuse1024/brick):287:set_passive] GeorepStatus:
Worker Status Change status=Passive
[2020-06-25 07:51:58.607768] I [gsyncdstatus(worker
/gluster/vg01/dispersed_fuse1024/brick):287:set_passive] GeorepStatus:
Worker Status Change status=Passive
[2020-06-25 07:51:58.608004] I [gsyncdstatus(worker
/gluster/vg00/dispersed_fuse1024/brick):281:set_active] GeorepStatus:
Worker Status Change status=Active
On 25/06/2020 09:15, Rob.Quagliozzi at rabobank.com wrote:
>
> Hi All,
>
> We’ve got two six node RHEL 7.8 clusters and geo-replication would
> appear to be completely broken between them. I’ve deleted the session,
> removed & recreated pem files, old changlogs/htime (after removing
> relevant options from volume) and completely set up geo-rep from
> scratch, but the new session comes up as Initializing, then goes
> faulty, and starts looping. Volume (on both sides) is a 4 x 2
> disperse, running Gluster v6 (RH latest). Gsyncd reports:
>
> [2020-06-25 07:07:14.701423] I
> [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker
> Status Change status=Initializing...
>
> [2020-06-25 07:07:14.701744] I [monitor(monitor):159:monitor] Monitor:
> starting gsyncd worker brick=/rhgs/brick20/brick
> slave_node=bxts470194.eu.rabonet.com
>
> [2020-06-25 07:07:14.707997] D [monitor(monitor):230:monitor] Monitor:
> Worker would mount volume privately
>
> [2020-06-25 07:07:14.757181] I [gsyncd(agent
> /rhgs/brick20/brick):318:main] <top>: Using session config file
> path=/var/lib/glusterd/geo-replication/prd_mx_intvol_bxts470190_prd_mx_intvol/gsyncd.conf
>
> [2020-06-25 07:07:14.758126] D [subcmds(agent
> /rhgs/brick20/brick):107:subcmd_agent] <top>: RPC FD
> rpc_fd='5,12,11,10'
>
> [2020-06-25 07:07:14.758627] I [changelogagent(agent
> /rhgs/brick20/brick):72:__init__] ChangelogAgent: Agent listining...
>
> [2020-06-25 07:07:14.764234] I [gsyncd(worker
> /rhgs/brick20/brick):318:main] <top>: Using session config file
> path=/var/lib/glusterd/geo-replication/prd_mx_intvol_bxts470190_prd_mx_intvol/gsyncd.conf
>
> [2020-06-25 07:07:14.779409] I [resource(worker
> /rhgs/brick20/brick):1386:connect_remote] SSH: Initializing SSH
> connection between master and slave...
>
> [2020-06-25 07:07:14.841793] D [repce(worker
> /rhgs/brick20/brick):195:push] RepceClient: call
> 6799:140380783982400:1593068834.84 __repce_version__() ...
>
> [2020-06-25 07:07:16.148725] D [repce(worker
> /rhgs/brick20/brick):215:__call__] RepceClient: call
> 6799:140380783982400:1593068834.84 __repce_version__ -> 1.0
>
> [2020-06-25 07:07:16.148911] D [repce(worker
> /rhgs/brick20/brick):195:push] RepceClient: call
> 6799:140380783982400:1593068836.15 version() ...
>
> [2020-06-25 07:07:16.149574] D [repce(worker
> /rhgs/brick20/brick):215:__call__] RepceClient: call
> 6799:140380783982400:1593068836.15 version -> 1.0
>
> [2020-06-25 07:07:16.149735] D [repce(worker
> /rhgs/brick20/brick):195:push] RepceClient: call
> 6799:140380783982400:1593068836.15 pid() ...
>
> [2020-06-25 07:07:16.150588] D [repce(worker
> /rhgs/brick20/brick):215:__call__] RepceClient: call
> 6799:140380783982400:1593068836.15 pid -> 30703
>
> [2020-06-25 07:07:16.150747] I [resource(worker
> /rhgs/brick20/brick):1435:connect_remote] SSH: SSH connection between
> master and slave established. duration=1.3712
>
> [2020-06-25 07:07:16.150819] I [resource(worker
> /rhgs/brick20/brick):1105:connect] GLUSTER: Mounting gluster volume
> locally...
>
> [2020-06-25 07:07:16.265860] D [resource(worker
> /rhgs/brick20/brick):879:inhibit] DirectMounter: auxiliary glusterfs
> mount in place
>
> [2020-06-25 07:07:17.272511] D [resource(worker
> /rhgs/brick20/brick):953:inhibit] DirectMounter: auxiliary glusterfs
> mount prepared
>
> [2020-06-25 07:07:17.272708] I [resource(worker
> /rhgs/brick20/brick):1128:connect] GLUSTER: Mounted gluster
> volume duration=1.1218
>
> [2020-06-25 07:07:17.272794] I [subcmds(worker
> /rhgs/brick20/brick):84:subcmd_worker] <top>: Worker spawn successful.
> Acknowledging back to monitor
>
> [2020-06-25 07:07:17.272973] D [master(worker
> /rhgs/brick20/brick):104:gmaster_builder] <top>: setting up change
> detection mode mode=xsync
>
> [2020-06-25 07:07:17.273063] D [monitor(monitor):273:monitor] Monitor:
> worker(/rhgs/brick20/brick) connected
>
> [2020-06-25 07:07:17.273678] D [master(worker
> /rhgs/brick20/brick):104:gmaster_builder] <top>: setting up change
> detection mode mode=changelog
>
> [2020-06-25 07:07:17.274224] D [master(worker
> /rhgs/brick20/brick):104:gmaster_builder] <top>: setting up change
> detection mode mode=changeloghistory
>
> [2020-06-25 07:07:17.276484] D [repce(worker
> /rhgs/brick20/brick):195:push] RepceClient: call
> 6799:140380783982400:1593068837.28 version() ...
>
> [2020-06-25 07:07:17.276916] D [repce(worker
> /rhgs/brick20/brick):215:__call__] RepceClient: call
> 6799:140380783982400:1593068837.28 version -> 1.0
>
> [2020-06-25 07:07:17.277009] D [master(worker
> /rhgs/brick20/brick):777:setup_working_dir] _GMaster: changelog
> working dir
> /var/lib/misc/gluster/gsyncd/prd_mx_intvol_bxts470190_prd_mx_intvol/rhgs-brick20-brick
>
> [2020-06-25 07:07:17.277098] D [repce(worker
> /rhgs/brick20/brick):195:push] RepceClient: call
> 6799:140380783982400:1593068837.28 init() ...
>
> [2020-06-25 07:07:17.292944] D [repce(worker
> /rhgs/brick20/brick):215:__call__] RepceClient: call
> 6799:140380783982400:1593068837.28 init -> None
>
> [2020-06-25 07:07:17.293097] D [repce(worker
> /rhgs/brick20/brick):195:push] RepceClient: call
> 6799:140380783982400:1593068837.29 register('/rhgs/brick20/brick',
> '/var/lib/misc/gluster/gsyncd/prd_mx_intvol_bxts470190_prd_mx_intvol/rhgs-brick20-brick',
> '/var/log/glusterfs/geo-replication/prd_mx_intvol_bxts470190_prd_mx_intvol/changes-rhgs-brick20-brick.log',
> 8, 5) ...
>
> [2020-06-25 07:07:19.296294] E [repce(agent
> /rhgs/brick20/brick):121:worker] <top>: call failed:
>
> Traceback (most recent call last):
>
> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 117,
> in worker
>
> res = getattr(self.obj, rmeth)(*in_data[2:])
>
> File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py",
> line 40, in register
>
> return Changes.cl_register(cl_brick, cl_dir, cl_log, cl_level,
> retries)
>
> File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py",
> line 46, in cl_register
>
> cls.raise_changelog_err()
>
> File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py",
> line 30, in raise_changelog_err
>
> raise ChangelogException(errn, os.strerror(errn))
>
> ChangelogException: [Errno 2] No such file or directory
>
> [2020-06-25 07:07:19.297161] E [repce(worker
> /rhgs/brick20/brick):213:__call__] RepceClient: call failed
> call=6799:140380783982400:1593068837.29 method=register
> error=ChangelogException
>
> [2020-06-25 07:07:19.297338] E [resource(worker
> /rhgs/brick20/brick):1286:service_loop] GLUSTER: Changelog register
> failed error=[Errno 2] No such file or directory
>
> [2020-06-25 07:07:19.315074] I [repce(agent
> /rhgs/brick20/brick):96:service_loop] RepceServer: terminating on
> reaching EOF.
>
> [2020-06-25 07:07:20.275701] I [monitor(monitor):280:monitor] Monitor:
> worker died in startup phase brick=/rhgs/brick20/brick
>
> [2020-06-25 07:07:20.277383] I
> [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker
> Status Change status=Faulty
>
> We’ve done everything we can think of, including an “strace –f” on the
> pid, and we can’t really find anything. I’m about to lose the last of
> my hair over this, so does anyone have any ideas at all? We’ve even
> removed the entire slave vol and rebuilt it.
>
> Thanks
>
> Rob
>
> *Rob Quagliozzi*
>
> *Specialised Application Support*
>
>
>
> ------------------------------------------------------------------------
> This email (including any attachments to it) is confidential, legally
> privileged, subject to copyright and is sent for the personal
> attention of the intended recipient only. If you have received this
> email in error, please advise us immediately and delete it. You are
> notified that disclosing, copying, distributing or taking any action
> in reliance on the contents of this information is strictly
> prohibited. Although we have taken reasonable precautions to ensure no
> viruses are present in this email, we cannot accept responsibility for
> any loss or damage arising from the viruses in this email or
> attachments. We exclude any liability for the content of this email,
> or for the consequences of any actions taken on the basis of the
> information provided in this email or its attachments, unless that
> information is subsequently confirmed in writing. <#rbnl#1898i>
> ------------------------------------------------------------------------
>
>
> ________
>
>
>
> Community Meeting Calendar:
>
> Schedule -
> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
> Bridge: https://bluejeans.com/441850968
>
> Gluster-users mailing list
> Gluster-users at gluster.org
> https://lists.gluster.org/mailman/listinfo/gluster-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20200625/f4c587d8/attachment.html>
More information about the Gluster-users
mailing list