<div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div><div><div><div><div><div><div><div>Here is the update of the progress till now:<br></div>* The client profile attached till now shows the tuple creation is dominated by writes and fstats. Note that fstats are side-effects of writes as writes invalidate attributes of the file from kernel attribute cache.<br></div>* The rest of the init phase (which is marked by msgs "setting primary key" and "vaccuum") is dominated by reads. Next bigger set of operations are writes followed by fstats.<br><br></div>So, only writes, reads and fstats are the operations we need to optimize to reduce the init time latency. As mentioned in my previous mail, I did following tunings:<br></div>* Enabled only write-behind, md-cache and open-behind. <br> - write-behind was configured with a cache-size/window-size of 20MB<br></div> - open-behind was configured with read-after-open yes<br></div> - md-cache was loaded as a child of write-behind in xlator graph. As a parent of write-behind, writes responses of writes cached in write-behind would invalidate stats. But when loaded as a child of write-behind this problem won't be there. Note that in both cases fstat would pass through write-behind (In the former case due to no stats in md-cache). However in the latter case fstats can be served by md-cache.<br></div> - md-cache used to aggressively invalidate inodes. For the purpose of this test, I just commented out inode-invalidate code in md-cache. We need to fine tune the invalidation invocation logic.<br></div> - set group-metadata-cache to on. But turned off upcall notifications. Note that since this workload basically accesses all its data through single mount point. So, there is no shared files across mounts and hence its safe to turn off invalidations.<br><div><div>* Applied fix to <a href="https://bugzilla.redhat.com/show_bug.cgi?id=1648781">https://bugzilla.redhat.com/show_bug.cgi?id=1648781</a><br><br></div><div>With the above set of tunings I could reduce the init time of scale 8000 from 16.6 hrs to 11.4 hrs - an improvement in the range 25% to 30%<br><br></div><div>Since the workload is dominated by reads, we think a good read-cache where reads to regions just written are served from cache would greatly improve the performance. Since kernel page-cache already provides that functionality along with read-ahead (which is more intelligent and serves more read patterns than supported by Glusterfs read-ahead), we wanted to try that. But, Manoj found a bug where reads followed by writes are not served from page cache [5]. I am currently waiting for the resolution of this bug. As an alternative, I can modify io-cache to serve reads from the data just written. But, the change involves its challenges and hence would like to get a resolution on [5] (either positive or negative) before proceeding with modifications to io-cache.<br><br>As to the rpc latency, Krutika had long back identified that reading a single rpc message involves atleast 4 reads to socket. These many number of reads were done to identify the structure of the message on the go. The reason we wanted to discover the rpc message was to identify the part of the rpc message containing read or write payload and make sure that payload is directly read into a buffer different than the one containing rest of the rpc message. This strategy will make sure payloads are not copied again when buffers are moved across caches (read-ahead, io-cache etc) and also the rest of the rpc message can be freed even though the payload outlives the rpc message (when payloads are cached). However, we can experiment an approach where we can either do away with zero-copy requirement or let the entire buffer containing rpc message and payload to live in the cache.<br><br></div><div>From my observations and discussions with Manoj and Xavi, this workload is very sensitive to latency (than to concurrency). So, I am hopeful the above approaches will give positive results.<br></div><div><br>[5] <a href="https://bugzilla.redhat.com/show_bug.cgi?id=1664934">https://bugzilla.redhat.com/show_bug.cgi?id=1664934</a><br></div><div><br></div><div>regards,<br></div><div>Raghavendra<br></div></div></div></div></div></div></div></div></div><br><div class="gmail_quote"><div dir="ltr">On Fri, Dec 28, 2018 at 12:44 PM Raghavendra Gowdappa <<a href="mailto:rgowdapp@redhat.com">rgowdapp@redhat.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote"><div dir="ltr">On Mon, Dec 24, 2018 at 6:05 PM Raghavendra Gowdappa <<a href="mailto:rgowdapp@redhat.com" target="_blank">rgowdapp@redhat.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote"><div dir="ltr">On Mon, Dec 24, 2018 at 3:40 PM Sankarshan Mukhopadhyay <<a href="mailto:sankarshan.mukhopadhyay@gmail.com" target="_blank">sankarshan.mukhopadhyay@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">[pulling the conclusions up to enable better in-line]<br>
<br>
> Conclusions:<br>
><br>
> We should never have a volume with caching-related xlators disabled. The price we pay for it is too high. We need to make them work consistently and aggressively to avoid as many requests as we can.<br>
<br>
Are there current issues in terms of behavior which are known/observed<br>
when these are enabled?<br></blockquote><div><br></div><div>We did have issues with pgbench in past. But they've have been fixed. Please refer to bz [1] for details. On 5.1, it runs successfully with all caching related xlators enabled. Having said that the only performance xlators which gave improved performance were open-behind and write-behind [2] (write-behind had some issues, which will be fixed by [3] and we'll have to measure performance again with fix to [3]). </div></div></div></div></div></div></div></blockquote><div><br></div><div>One quick update. Enabling write-behind and md-cache with fix for [3] reduced the total time taken for pgbench init phase roughly by 20%-25% (from 12.5 min to 9.75 min for a scale of 100). Though this is still a huge time (around 12hrs for a db of scale 8000). I'll follow up with a detailed report once my experiments are complete. Currently trying to optimize the read path.<br> <br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div class="gmail_quote"><div>For some reason, read-side caching didn't improve transactions per second. I am working on this problem currently. Note that these bugs measure transaction phase of pgbench, but what xavi measured in his mail is init phase. Nevertheless, evaluation of read caching (metadata/data) will still be relevant for init phase too.<br><br>[1] <a href="https://bugzilla.redhat.com/show_bug.cgi?id=1512691" target="_blank">https://bugzilla.redhat.com/show_bug.cgi?id=1512691</a><br>[2] <a href="https://bugzilla.redhat.com/show_bug.cgi?id=1629589#c4" target="_blank">https://bugzilla.redhat.com/show_bug.cgi?id=1629589#c4</a><br>[3] <a href="https://bugzilla.redhat.com/show_bug.cgi?id=1648781" target="_blank">https://bugzilla.redhat.com/show_bug.cgi?id=1648781</a><br><br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<br>
> We need to analyze client/server xlators deeper to see if we can avoid some delays. However optimizing something that is already at the microsecond level can be very hard.<br>
<br>
That is true - are there any significant gains which can be accrued by<br>
putting efforts here or, should this be a lower priority?<br></blockquote><div><br></div><div>The problem identified by xavi is also the one we (Manoj, Krutika, me and Milind) had encountered in the past [4]. The solution we used was to have multiple rpc connections between single brick and client. The solution indeed fixed the bottleneck. So, there is definitely work involved here - either to fix the single connection model or go with multiple connection model. Its preferred to improve single connection and resort to multiple connections only if bottlenecks in single connection are not fixable. Personally I think this is high priority along with having appropriate client side caching.<br><br>[4] <a href="https://bugzilla.redhat.com/show_bug.cgi?id=1467614#c52" target="_blank">https://bugzilla.redhat.com/show_bug.cgi?id=1467614#c52</a><br><br> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<br>
> We need to determine what causes the fluctuations in brick side and avoid them.<br>
> This scenario is very similar to a smallfile/metadata workload, so this is probably one important cause of its bad performance.<br>
<br>
What kind of instrumentation is required to enable the determination?<br>
<br>
On Fri, Dec 21, 2018 at 1:48 PM Xavi Hernandez <<a href="mailto:xhernandez@redhat.com" target="_blank">xhernandez@redhat.com</a>> wrote:<br>
><br>
> Hi,<br>
><br>
> I've done some tracing of the latency that network layer introduces in gluster. I've made the analysis as part of the pgbench performance issue (in particulat the initialization and scaling phase), so I decided to look at READV for this particular workload, but I think the results can be extrapolated to other operations that also have small latency (cached data from FS for example).<br>
><br>
> Note that measuring latencies introduces some latency. It consists in a call to clock_get_time() for each probe point, so the real latency will be a bit lower, but still proportional to these numbers.<br>
><br>
<br>
[snip]<br>
_______________________________________________<br>
Gluster-devel mailing list<br>
<a href="mailto:Gluster-devel@gluster.org" target="_blank">Gluster-devel@gluster.org</a><br>
<a href="https://lists.gluster.org/mailman/listinfo/gluster-devel" rel="noreferrer" target="_blank">https://lists.gluster.org/mailman/listinfo/gluster-devel</a><br>
</blockquote></div></div></div></div></div></div>
</blockquote></div></div>
</blockquote></div>